| Round blade Tungsten steel blade This section describes the
parameters |
|
| I. Product overview |
| Tungsten steel blade is a round cutting tool made of tungsten steel
material, widely used in various industrial cutting fields, because
of its excellent hardness, wear resistance and cutting properties
are favored. |
|
| Ii. Main parameters |
| (1) Size specifications |
| 1. Diameter: Common diameter sizes are 25mm, 28mm, 32mm and so on. |
| 2. Thickness: Thickness is usually between 0.5mm and 1mm, common
0.6mm, 0.8mm and so on. |
| 3. Diameter of the inner hole: The diameter of the inner hole
depends on the installation requirements, common 8mm, 10mm and so
on. |
| (2) Tungsten steel material characteristics |
| 1. Hardness: The hardness can reach 90HRA, with excellent wear
resistance and deformation resistance. |
| 2. Bending strength: generally above 800MPa to ensure stability in
the cutting process. |
| 3. Density: The density of tungsten steel is about 13.5g/cm³, which
makes it have high quality and stability. |
| (3) Cutting edge parameters |
| 1. Cutting edge sharpness: After fine grinding, the sharpness of
the cutting edge reaches [specific sharpness standard], which can
achieve efficient cutting. |
| 2. Cutting edge Angle: The common cutting edge Angle is 36°, 60°,
etc., different angles are suitable for different cutting materials
and working conditions. |
| (4) Surface treatment |
| 1. Coating: Coating treatment can be performed according to demand,
such as TiN (titanium nitride), TiAlN (titanium aluminum nitride),
etc., to improve the wear resistance and service life of the blade. |
| 2. Polishing: The surface is finely polished to reduce the friction
coefficient and improve the cutting fluency. |
|
| Third, performance advantage |
| 1. High precision: high precision cutting can be achieved to ensure
the flatness and dimensional accuracy of the cutting surface. |
| 2. Long life: Due to the excellent performance of tungsten steel,
the blade has a long service life, reducing the replacement
frequency and cost. |
| 3.Good stability: in the process of high-speed rotation and
cutting, maintain stable performance, reduce vibration and
deviation. |
| 4. Scope of application |
| Suitable for paper, plastic film, rubber, leather, textile and
other materials cutting processing. |
|
| 5. Precautions |
| 1. Ensure that the blade is securely installed to prevent it from
loosening during operation. |
| 2. In the process of use, the appropriate cutting parameters should
be selected according to the cutting materials and working
conditions, such as speed, feed speed, etc. |
| 3. Check and maintain the blade regularly. Replace the blade in
time if it is found to be worn or damaged. |
